Pulling length can be adjusted. Mold is fixed by located groove so that it's easy to change mold.
The machine heats the PVC through heated board and forms by compressed air frothing.
Speed is controlled by inverter. It Adopts the interface of human machine and PLC controller. Adopt universal feeder for feeding.
The machine gets the function for Easy Cutting line embossing, batch number embossing and wasted packaging material rewinding.
Step motor is adopted on the machine for precise controlling on pulling length and saving packing material.
The heating molds will automatically separate when the machine stops, which contributes to protect the packing material from heated mould.

Specifications

Machine Model		DPP-250A
Machine Body		Stainless Steel 304/316
Blanking frequency(times/min)		15-45
Blister plats size		Design according to customers’ requirements
Adjustable pulling length		30-130mm
Max Forming area and depth(mm)		25012015 (30 need Private custom)
Air compressor(Don't Provide)		0.6-0.8Mpa ≥0.45m3/min
Mould cooling		40-80 L/h
Power supply (Three phase)		380V/220V 50HZ 8KW (According to the customer need to select the voltage)
Wrapper specification(mm)	PVC	260(0.15-0.6)(Φ400)
	Aluminum foil	260(0.02-0.035)(Φ400)
Overall Dimension(LWH)(including foundation)		29007501600
Dimension of Each Part		15007501600(front)
		14007501450(back)
Weight		About 1200kg

Competitive Advantage

All of the air supply and synchronization of the machine is controlled by the encoder. All synchronous

data have been programmed in advance so that there is no need to adjust air supply and pulling time

manually. The machine in other factory use Cam control, which means the process is mechanical.

The biggest disadvantage of it is that the friction is inevitably which will lead to wear and tear. As time

passes, the synchronization is not accurate. But our machines use encoder control, so that there is no

need to worry about the synchronization. If the encoder is broken, you can also buy it in the local, it’s

convenient.

Our machine use Stepper motor to control the pulling length. When change the model, there is no need

to adjust the machine so that it’s convenient and easy operating. What I want to mention is that the

machines in other factory use gas clip to control the pulling length. It has two shortcomings. First, when

you change the models, you need to adjust the pulling length manually which means adjusting screw in

the pulling position. If the Operating workers is unskilled, it will waste the material and time.

Our machines have PRC (print register control) system, is the cursor version of function, because the

machine is a stepper motor, so is true of PRC system forever won't generation shift. Other

manufacturers may be gas clip can only be manually adjusted, a long time after the shift will occur.

OVERALL SKETCH

1: PVC feeder	2: PVC transporting roller
3: Heating box	4: Forming mechanism
5: Medicine feeder (The manual feeding without this station)	6: Touch-screen
	7: PTP transporting roller
8: Heat-sealing mechanism	9: Trace-pressing mechanism
10: PTP feeding mechanism & scrap-collector	11: Tow mechanism
12: Blanking mechanism	13: Finished product output

Product Tags:

Servo Motor Alu Plastic Automatic Blister Packing Machine Tablet Blister Machine

Automatic Blister Packing Machine